Hi. Does anyone know if the flow controller plugs (Eagle vision or otherwise) always have a fixed diameter hole through the middle or does this vary (either depending on overall plug size or does it vary even with the same plug diameter?). I'm currently plugged in one eye with an ordinary plug in the bottom punctum and a flow controller in the upper one. Initially I had just one lower ordinary plug. This wasn't enough so I had the upper plugged - but this gave me far too much epiphoria. This was then replaced with a flow controller, but I still have the annoying epiphoria (not as much, but still enough to be a right pain sometimes!). If I could get a flow controller with a slightly bigger hole maybe that would work. Alternatively maybe it would be worth replacing the lower with a flow controller too - the question is do 2 flow controllers = more occlusion than 1 ordinary lower plug?
Any useful input appreciated!
Any useful input appreciated!
Comment